网站关键词: 铜门 18iuck新利 菜馆铜门 济南铜门 18IUCK新利官网
当前所在位置:首页>>新利娱乐注册平台登录>>济南铜门门洞的大小怎么测试合适? 新利娱乐注册平台登录

济南铜门门洞的大小怎么测试合适?

来源: //www.amishhacks.com日期:2023-12-14 发布人:qinfu浏览次数:
量门就是对所需安装门的门洞进行宽度、高度、厚度及特殊情况的实地测量,以确认实际所需门的尺寸即称之为量门(高度注意贴地板加减尺寸、宽度注意批灰)。
The measurement door is a field measurement of the width, height, thickness, and special circumstances of the door opening that needs to be installed, in order to confirm the actual size of the required door, which is called the measurement door (pay attention to adding or subtracting dimensions according to the floor height, and pay attention to plastering the width).
在测量门洞的宽度和高度的时候需要对门洞的上、中、下三处进行测量,如果不一致,以Z窄处为准,但误差不得超过20mm。如果误差超过20mm需要及时进行修正。
When measuring the width and height of the door opening, it is necessary to measure the upper, middle, and lower parts of the door opening. If there is any inconsistency, the narrow part of Z shall prevail, but the error shall not exceed 20mm. If the error exceeds 20mm, it needs to be corrected in a timely manner.
济南铜门
客户和施工负责人必须在现场;水电改造及墙体改造必须完工;水平线具备,厨卫墙、地砖需要铺好,铺地板的房间需要地面找平做好。墙、地砖、地板的高度要确定;确定平墙是否要增加墙垛。
Customers and construction managers must be present on site; Water and electricity renovation and wall renovation must be completed; Horizontal lines are in place, kitchen and bathroom walls and floor tiles need to be laid, and rooms with flooring need to be leveled and done well. The height of walls, floor tiles, and floors should be determined; Determine whether to add wall piers to the flat wall.
门洞墙体的厚度也是一样的测试方法,但是数据是取Z大值,并且误超不差过5mm。当门上有突出的梁时,上面的线不能安装。
The thickness of the door opening wall is also tested using the same method, but the data is taken as the maximum Z value, and the error is no more than 5mm. When there is a protruding beam on the door, the line above cannot be installed.
新闻资讯
-News and information-
在线客服
二维码

扫描二维码

Baidu
map